256MB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V,32Meg x 64, 184-pin DIMM. A dual inline memorymodule (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins onthe bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktopcomputers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into astandard SDRAM DIMM socket. (Information about which memory technology your system uses is includedin the Crucial Memory Advisor tool.) The numberof black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs areapproximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
» Specifications
General Information
Manufacturer
Crucial Technology
Manufacturer Part Number
CT3264Z40B
Manufacturer Website Address
www.crucial.com
Product Name
256MB DDR SDRAM Memory Module
Marketing Information
When you buy Crucial memory, you're buying directly from the largest DRAM manufacturer in America and one of the top three in the world. Crucial Technology is a division of Micron. We have more than 20 years of industry experience, most efficient DRAM manufacturer, and many of the world's leading computer manufacturers use our memory. Crucial brings that same high-quality memory directly to you, the end consumer.
